AIM-TTi SMU-LINK for SMU4000 Series Source Measure Unit (SMU)
The SMU-LINK is an accessory that can be used to connect two SMUs together.
For use with the SMU4001 and SMU4201 single channel SMU from AIM-TTi.
The SMU-LINK is an accessory that can be used to connect two SMUs together to perform simultaneously via a handshake triggering system, effectively creating a fully functioning 2 channel SMU, useful for testing three leaded components such as small signal BJT’s, FET’s and more.
|
|
Aim-TTi SMU4201/4001 |
|
Display |
4.3” Colour LCD w/touch-panel |
|
Terminals |
Front and Rear, Parallel |
|
Size |
250mm(W) x 97mm(H) 295mm(D) 2U ½ rack) |
|
4.25kg |
|
|
Interfaces |
LAN |
|
USB |
|
|
GPIB (optional) |
|
|
Flash Drive |
|
|
8-port Digital |
|
|
Channels |
1 |
|
|
|
|
Operating Modes and Features |
|
|
Modes |
SV, SC |
|
LC, LR and LP load modes with voltage dropout setting. |
|
|
MV and MC measurement modes. |
|
|
MR and MHR resistance measurement modes. |
|
|
|
|
|
Shapes |
Sweep (Lin/Log, Dual) |
|
Pulse |
|
|
Pulse Sweep |
|
|
List |
|
|
4-quadrant Voltage Source |
|
|
Max Voltage |
210V |
|
Sensing |
2- or 4-wire |
|
Guarding |
Yes |
|
Resolution |
0.1uV |
|
Max Continuous Load |
25W (with power flex limit) |
|
3A @ <21V |
|
|
0.5A @ 21-210V |
|
|
Max Time Limited Load |
As continuous |
|
Ranges |
5 Fixed or auto range |
|
Accuracy |
20mV: 0.06%rdg ± 50µV |
|
200mV: 0.015%rdg ± 50µV |
|
|
2V: 0.015%rdg ± 50µV |
|
|
20V: 0.02%rdg ± 5mV |
|
|
200V: 0.02%rdg ± 5mV |
|
|
AC Noise (rms, typ) |
<2mV @ <21V / 20MHz |
|
<3.5mV @ 21-210V / 20MHz |
|
|
|
|
|
Reach to 0.1% (typ) |
300us independent of voltage |
|
No Load |
|
|
|
|
|
|
|
|
|
|
|
Slew Rate |
Adjustable up to 1.2V/us |
|
Overshoot (typ) |
0.5%+1mV |
|
Capacitive Loading |
Normal : stable to 0.2uF |
|
HiC : stable to >200uF |
|
|
Protection |
OVP |
|
OCP |
|
|
OTP |
|
|
OPP |
|
|
4-quadrant Current Source/Load |
|
|
Max Current |
3A |
|
Sensing |
2- or 4-wire |
|
Guarding |
Yes |
|
Resolution |
100fA |
|
Max Continuous Load |
25W (with power flex) |
|
3A @ <21V |
|
|
0.5A @ 21-210V |
|
|
Max Time Limited Load |
As continuous |
|
Ranges |
9, Fixed or auto-range |
|
Accuracy |
200nA: 0.04%rdg ± 300pA |
|
2uA: 0.03%rdg ± 300pA |
|
|
20uA: 0.02%rdg ± 2nA |
|
|
200uA: 0.02%rdg ± 2nA |
|
|
2mA: 0.02%rdg ± 200nA |
|
|
20mA: 0.02%rdg ± 2uA |
|
|
200mA: 0.02%rdg ± 20µA |
|
|
1A: 0.07%rdg ± 100µA |
|
|
3A: 0.2%rdg ± 300µA |
|
|
|
|
|
Settling (typ) |
2.5ms < 210uA |
|
Shorted Load |
600us < 2.1mA |
|
|
200us < 3.15A |
|
|
|
|
Slew Rate |
Adjustable up to 36mA/us |
|
Measurements |
|
|
Digitize Results |
5ksps |
|
Measurement Results |
200us-20s or 0.01-100PLC |
|
1ppm resolution |
|
|
Voltage and current with no speed penalty |
|
|
Measurement Accuracy |
Same as sourcing accuracy |
|
Math Capabilities |
Can be configured to perform (x-c), (mx+c), ((x-c) /c) or (x/c) on either measurement result. |
|
Limit and Binning Capabilities |
Tolerance checking on any measurement result. |
|
Remote binning can be performed using sequence mode and DIO. |
|
|
|
AIM-TTi LINK ADAPTOR For SMU4000 Series Instruction Manual
AIM-TTi SMU4000 Series Datasheet
AIM-TTi SMU4000 Instruction Manual
AIM-TTi SMU Safety Documentation & Quick Start Guide
AIM-TTi SMU4000 Programming Manual
AIM-TTi Test Bridge SMU Installation Application Note
AIM-TTi Sending Lists and Sequences via LAN Application Note
| Photo | Product | SKU | |
|---|---|---|---|
 | AIM-TTi SMU4001 Source Measure Unit (SMU) ±21V | - | > |
 | AIM-TTi SMU4201 Source Measure Unit (SMU) ±210V | - | > |
 | SRS CS580 Voltage Controlled Current Source, ±50 V, 100fA to 100mA | - | > |
 | SRS DC215 — Precision DC Voltage/Current Source | - | > |
 | SRS DC205 Precision DC Voltage Source | - | > |
