YIC Technologies EMScanner® 150KHz to 8GHz EMC/EMI Scanner
The EMScanner® from Y.I.C. Technologies consists of a patented scanner fitted a compact controller, and a PC running EMViewer software. A great tool for EMI Pre-compliance checking to visually identify EMI/EMC issues and solve these quickly using the software tools to locate the faults. The EMScanner® can be used with most leading brands of Spectrum Analysers, like Rigol Technologies, Keysight, Rohde & Schwarz and Tektronix (please call to check).
The patented scanner consists of an array of 1,218 H-field (magnetic) probes spaced every 7.5 mm which provides an effective 3.75 mm resolution. The system operates from 150 kHz to 4 GHz and from 150 kHz to 8 GHz with upgradable and optional software license key. The EMViewer application must also be installed on the customer-supplied PC.
EMScanner® is a self-contained very-near-field scanning device which connects to a spectrum analyser or a desk top PC running a copy of EMScanner Software. The EMScanner® system operates from 150 kHz to 8 GHz and delivers repeatable and reliable results that pinpoint the cause of a design failure in seconds.
With EMScanner® design teams can personally test their designs without having to rely on another department, test engineer, or time-consuming off-site testing. After diagnosing even an intermittent problem, the engineer can implement a design change and retest, and the results provide concrete verification of the effectiveness (or not) of the design change.
EMScanner® diagnostic capabilities allow design teams to reduce testing time by more than two orders of magnitude. Users have also documented fifty percent reductions in design cycle times.
Ideal PCB projects for EMScanner® are boards designed for high speed, high power, and/or high density/complexity. Any PCB that places a premium on board real-estate also qualifies as an excellent candidate. The compact, flat scanner provides PCB design teams with an easy-to-use, cost effective, and proven tabletop solution. Emission, immunity, filtering, EMI shielding, broadband noise and Common Mode testing are some of the applications that the EMScanner system addresses in mere seconds.
Y.I.C. Technologies products are compatible with the most Spectrum Analysers.
Capability:
Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines and report generation.
Spatial scan time:
Continuous real-time or sub-second single scan for entire scan area dependent on spectrum analyser performance.
Spectral scan time:
45 seconds for L 10 cm x W 10 cm (L 4” x W 4”) PCB with a 100 MHz span and 100 kHz RBW. Scanning area, span and RBW are user selectable within spectrum analyser specifications
Supported operating systems:
Windows 10®
Supported CAD overlays:
Standard Gerber© RS274x format and HPGL format
| Broadband frequency coverage | EMS8000 – Base configuration = 150 kHz to 8 GHz |
| Antenna array | 1,218 (42 x 29) H-field probes Measurement sensitivity: Dependent on spectrum analyser performance |
| Spatial resolution | Probe spacing of 7.5 mm with an ‘effective’ resolution of 3.75 mm |
| Scan area | L 31.6 cm x W 21.8 cm (L 12.44” x W 8.58”) |
| Frequency accuracy of peaks | Peak marking accuracy of spectrum analyser |
| Probe to probe uniformity | Calibrated before shipment. Firmware correction factors adjust for frequency dependant probe responses with +/- 3 dB accuracy |
| Measurement plane isolation | > 20 dB |
| Maximum radiated power load | 10 W |
| Enclosure | Anodized non-conductive metal |
| Maximum DUT voltage | Glass Cover: 4kV DC; 2.6kV AC | Metal Case: 260V DC; 200V AC (measured as dielectric withstanding voltage – DWV) |
| Operating temperature | / 40 dBmFrom 15⁰ C to 40⁰ C (continuous spectral and spatial scans at 50 MHz) |
| In situ scanning | 6U Size C scanner fits into VXI and VME chassis |
| Scanner connections | Spectrum analyser: RF SMA to type N coaxial cable | Adaptor: Proprietary DB25 |
| Supported Analyzers (If your analyzer is not listed contact us) |
Keysight: N9000A-CXA, N9000B-CXA, N9010A-EXA, N9010B-EXA, N9020B-MXA, N9020A-MXA, N9038A-MXE, N9912A-FieldFox, N9916A-FieldFox, N9918A-FieldFox, N9952A-FieldFox, E4440A-PSA, N9030A-PXA, N9040B-UXA Rohde & Swartz: ZVL, ZVB20, ZNB8, FSW, FSV4, FSV3, FPL |
| Dimensions of the scanner | L 39.2 cm x W 24.4 cm x H 1.7 cm (L 15.43” x W 9.61” x H 0.67”) |
| Weight | 2.80 Kg / 6.17 lb (including cables and the adaptor) |
YIC EMScanner Datasheet | Photo | Product | SKU | |
|---|---|---|---|
 | YIC Technologies EMProbe EMC Scanner | - | > |
 | Beehive 112A EMC Probe Cable, SMB to N-Type Cable | - | > |
 | Beehive 100A EMC Probe Medium-Loop Magnetic Field EMC Probe | - | > |
 | Beehive 100C EMC Probe Large-Loop Magnetic Field EMC Probe | - | > |
 | Beehive 150A 100kHz – 6GHz EMC Probe Amplifier | - | > |
 | Beehive 100B EMC Probe | - | > |
 | Beehive 100D EMC Probe | - | > |
 | Beehive 110A EMC Probe Cable, SMB to SMA Cable | - | > |
 | Beehive 114A Amplifier Cable, SMA to N-Type Cable | - | > |
 | Beehive 135A RF Helmholtz Coil | - | > |
 | Beehive 101A EMC Probe Set | - | > |
 | Beehive EMC Probe Adapter 0309-0001, SMB to SMA Adapter | - | > |
 | Beehive EMC Probe Adapter 0309-0006, SMB to BNC Adapter | - | > |
 | YIC Technologies EMS8000® High Speed 8GHz High Resolution EMC & EMI Diagnostic Tool on your Lab Bench | - | > |
 | YIC Technologies NFP Kit-Near Field Probe Solution | - | > |
 | Beehive 101A EMC Probe Kit with 112A SMB to Type-N Cable | - | > |
 | AIM-TTi Low Distortion 1kW Power Source, AC1000A | - | > |
 | AIM-TTi AC Line Harmonics Analyser including Flicker Analysis, HA1600A | - | > |
 | YIC Technologies RFScanner | - | > |
 | Tekbox Emcview PC Software For EMC Pre-Compliance Testing | - | > |
 | YIC Technologies NFP Kit-Near Field Probe Solution - 3 year Support Package | - | > |
 | YIC Technologies NFP Kit-Near Field Probe Solution - 5 year Support Package | - | > |