Protective carry case with two side and one front pocket for carrying probes and leads. There is also a divider in the main compartment to protect your MSO leads.

This bag is suitable for the following Rigol products:

• DS/MSO1000 Series
• DHO1000 Series
• DHO4000 Series

The Sensepeek 4013 probe allows connection to an oscilloscope for measuring signals up to 100MHz.

Includes:

• 1x SP100 - 100 MHz handsfree oscilloscope probe
• 1x Test hook with detachable cable for ground connection
• 2x Ground cables (5cm & 10cm)
• 1x Set of colour coded cable holders (4 colours)
• 1x Extra test needle

Check out the new SQ200 version of this probe offering additional grounding options (Product Code: 74615)

INCLUDES:

• 2x SP10 probes with red/black probe head and pin tipped test needles
• 2x Banana to dupont test wires red/black
• 2x Extra crown tipped test needles

The Pico Technology TA375 is a passive switchable oscilloscope probe, with a probe bandwidth of 100 MHz.

Low cost 100MHz oscilloscope suitable for use with Picoscopes and any other brand oscilloscope.

• Replacement +TA385 spring tips and TA384 rigid tips are available separately
• Redesigned probe hook accessory fitting
• Upgraded high durability probe cable

The MI031 is a 2 metre (6.6 ft) BNC plug to crocodile clip cable for making temporary connection to terminals. Terminated with red and black colour-coded crocodile clips

INCLUDES:

• 8x2 cable holders
• 2x test hooks
• 2x 10cm test cables
• 2x 5cm test cables

The Sensepeek 4014 probe allows connection to an oscilloscope for measuring signals up to 200MHz.

Includes:

• 1x SP200 - 200 MHz handsfree oscilloscope probe
• 1x Test hook with detachable cable for ground connection
• 2x Ground cables (5cm & 10cm)
• 1x Set of colour coded cable holders (4 colours)
• 1x Extra test needle

Check out the new SQ200 version of this probe offering additional grounding options (Product Code: 74615)

INCLUDES:

• 4x PCBite holder
• 1x Large Base plate (A4)
• 2x SP200 - 200 Mhz handsfree oscilloscope probes (article 4014)
• 1x Set of yellow insulation washers
• 1x Micro fibre cloth

If you are looking for extra protecting when working with powered PCBs, want to clean up your worksurface or eliminate reflection from microscope lightning when working with small PCBs under microscope this accessory is the solution.

One of our most popular kits, the 4018 contains the original 4003 kits with the addition of two 100MHz oscilloscope probes terminated with BNC and an insulated cover.

INCLUDES:

• 2x SP100 - 100 MHz handsfree oscilloscope probes (4013)
• 1x PCBite kit with 4x PCBite probes and test wires (4003)
• 1x Insulation cover (4017)

The SP200 probes are being discontinued and replaced by the new SQ200 probes for improved performance, please see links below:

Sensepeek 6019 PCBite Kit with 2x SQ200 200 MHz & 4x SQ10 Handsfree Probes 

Sensepeek 6027 PCBite Kit with 2x SQ350 350 MHz & 4x SQ10 Handsfree Probes 

Sensepeek 6029 PCBite Kit with 2x SQ500 500 MHz & 4x SQ10 Handsfree Probes 

The new PCBite Magnifier enlarges your target and makes it easier to see during soldering, inspection and measurements.

• 3x magnification edgeless lens for increased visibility
• Anti-reflective coating design
• Ideal for use with PCBite PCB holders and baseplates included in all PCBite kits
• Can also be used handheld but not standalone without a metal surface as base
• Friction based adjustment of lens tilt and rotate positions takes away the need for annoying and complicated set screws
• Premium build quality

A complete PCBite kit with four complete handsfree SQ10 probes packed together with test wires for connection directly to a Saleae logic analyser, DMM multimeter or your preferred tool. This is the new and upgraded version of the popular 4003 kit.

Kit Includes:

• 4x SQ10 probes and pin tipped test needles (black)
• 4 x Cable holders 4 colours to 1mm
• 2 x 4mm to banana plugs red/black
• 4 x Cable holders 4 colours
• 4× PCBite PCB holders
• 1x Large Base plate (A4) with Insulation cover
• 1x Micro fibre cloth

Looking for a Saleae Logic Analyser? Please click here to see the full range.

Updated version of the popular 4005 truly hands-free probe!

Simple but very effective, once tried you will never look back. Simple gravity keeps the probe in place freeing up your hand to make measurements.

The new version has the upgraded SQ series head and upgraded test leads with colour coded ties.

INCLUDES:

• 4× PCBite SQ10 probes with pin tipped test needles
• 4x Extra test needles
• 4x Dupont to dupont test wires
• 2x 4mm Banana to dupont test wires (Red/Black)

Click here to see the full range of Sensepeek products from Lambda Photometrics.

New from Sensepeek, complete handsfree 200 MHz oscilloscope probe that makes instant measurements or long triggering sessions a breeze. This is a complementary product for use with the Sensepeek range of handsfree probing kits and accessories. The new Sensepeek SQ200 can be used hands free or removed for quick probing around your PCB.

• Passive 10:1 probe with support for oscilloscopes with automatic scaling
• Spring-loaded test needle for fine pitch measurements
• Multiple ground / grounding options
• Colour coded cable holders
• Probe tip protection
• Insulated, can be used handheld
• Improved probe holder for handsfree measurement when used with PCBite PCB holders

Also available in 350MHz and 500MHz bandwidths.

New from Sensepeek, complete handsfree 350 MHz oscilloscope probe that makes instant measurements or long triggering sessions a breeze. This is a complementary product for use with the Sensepeek range of handsfree probing kits and accessories. The new Sensepeek SQ350  can be used hands free or removed for quick probing around your PCB.

• Passive 10:1 probe with support for oscilloscopes with automatic scaling
• Spring-loaded test needle for fine pitch measurements
• Multiple ground / grounding options
• Colour coded cable holders
• Probe tip protection
• Insulated, can be used handheld
• Improved probe holder for handsfree measurement when used with PCBite PCB holders

Also available in 200MHz and 500MHz bandwidths.

New from Sensepeek, complete handsfree 500 MHz oscilloscope probe that makes instant measurements or long triggering sessions a breeze. This is a complementary product for use with the Sensepeek range of handsfree probing kits and accessories. The new Sensepeek SQ500  can be used hands free or removed for quick probing around your PCB.

• Passive 10:1 probe with support for oscilloscopes with automatic scaling
• Spring-loaded test needle for fine pitch measurements
• Multiple ground / grounding options
• Colour coded cable holders
• Probe tip protection
• Insulated, can be used handheld
• Improved probe holder for handsfree measurement when used with PCBite PCB holders

Also available in 200MHz and 350MHz bandwidths.

Extra set of two PCBite PCB holders with insulation washers.

If you require four extra PCB Holders or need an small A5 baseplate please order the 4002 Kit for extra value.

The NEW Sensepeek 6016 kit consists of the following parts and is an upgraded version of the popular 4016 with the new 200MHz SQ Series scope probes

• 4× PCBite PCB holders
• 1x Set of yellow insulation washers for the PCB holders
• 1x Large Base plate (A4)
• 1x Insulation cover for the base plate (A4)
• 1x Micro fibre cloth
• 2x SQ200 - 200 MHz handsfree oscilloscope probes

One complete PCBite kit with two of the new design SQ350 handsfree 350 MHz oscilloscope probes that makes instant measurements or long triggering sessions a breeze. The kit contains the popular the A4 base with insulated cover and four PCBite PCB holders .

Protective carry case with two side and one front pocket for carrying probes and leads. There is also a divider in the main compartment to protect your MSO leads.

This bag is suitable for the following Rigol products:

• DHO800
• DHO900 

One complete PCBite kit with two handsfree 500 MHz oscilloscope probes that makes instant measurements or long triggering sessions a breeze.

• 4× PCBite PCB holders
• 1x Set of yellow insulation washers for the PCB holders
• 1x Large Base plate (A4)
• 1x Insulation cover for the base plate (A4) 
• 1x Micro fibre cloth
• 2x SQ500 - 500 Mhz handsfree oscilloscope probes 

Unique ground spring for total handsfree measurements at the rated bandwidth of your SQ oscilloscope probe from Sensepeek.

• 5x Ground spring needle 3.5mm

Compatible with the following Sensepeek probes: SQ200 SQ350 SQ500

• Teaching tool which can be used as a quick start guide with any manufacturers of oscilloscopes to minimise familiarisation / learning time involved with using a new oscilloscope. 
• Two configuration switches for selecting waveform type, speeds, serial interfaces and other parameters.
• Built-in function / waveform generator (0.2 Hz to 10 kHz in 16 steps)
  for generation of sine, square, triangle, ramp and many other test signals.
• Generation of common serial protocols such as SPI, I2C, UART, CAN, CAN-FD, LIN, Manchester and parallel bus interface. 
• Advanced triggering methodology and fundamentals. 
• RF test track with 450 ps rise time (RF and termination demo on PCB’s).

This oscilloscope demo board is well-suited for educational purposes and serves as an excellent guide for everyone from beginners, complete with a comprehensive primer on oscilloscope fundamentals, to the more advanced seasoned users of test instrumentation.