SRS SR630 16 Channel Thermocouple Monitor

Lambda Exclusive Promotion:
Additional 12 months warranty for free (2 years total) via our UK Service Centre.

The Stanford Research SR630 is a 16 channel thermocouple monitor designed to read, scan, print, and log temperatures or voltages. You can use any one of seven standard thermocouple types to read temperatures from -200°C to +1700°C. For remote monitoring applications, the SRS SR630 can time-stamp and store up to 2000 readings in non-volatile memory for later analysis.

Accessible Data
Temperature readings from the SR630 can be viewed on the front panel, or queried via the instrument's standard RS-232 or GPIB interfaces. In addition, the standard Centronics printer port provides convenient hardcopy output in either tabular or strip chart format.

Flexible Configuration
Temperature measurements can be made up to 12 times per second, with values reported in either °Fahrenheit, °Celsius, °Kelvin, or Volts. Programmable audible-alarm limits for each channel alert you to out-of range temperature conditions. A back panel relay output is available to provide shut-down capability when the limit conditions are exceeded.

Voltage Monitor
The SR630 can also be configured as a 16 channel DC voltmeter, with full scale ranges from 30 mV (1 m V resolution) to 100 V. As a voltmeter, the unit has 0.05% accuracy and 1 mV input offset drift. Each channel can be set independently to monitor either temperature or voltage, giving the SR630 even more flexibility in your application. Four rear-panel outputs are also available to provide a voltage proportional to the temperature of the first four input channels. The voltage outputs can be used to drive recorders, or to control external instrumentation.

Inputs
Sixteen screw-terminal inputs are mounted on a rear-panel isothermal block for cold junction compensation. The isolated differential inputs have a 250 V breakdown level, allowing the SR630 to tackle difficult applications such as temperature profiling of electrically live equipment. Each of the 16 channels may be independently set to display in units of millivolts, volts, °K, °C, or °F. Similarly, thermocouple type, nominal temperature, temperature limit and alarms may be uniquely set for each channel, providing complete flexibility in the configuration of the instrument. Access to any channel parameter is provided through the front panel or via the computer interfaces. The SR630 can store up to nine entire instrument configurations, including thermocouple type and temperature limits for all 16 channels.

Outputs
There are four analog outputs on the rear panel of the instrument. These outputs have a full scale range of ±10.0 VDC, with 5 mV resolution. The outputs can be set directly through the computer interfaces, or they can output a voltage proportional to the reading on channels one through four. When used as proportional outputs, both the slope (m) and offset (b) of the equation, Vout = ±mX + b, are changed by setting the nominal temperature and chart span for the corresponding channel. X is either temperature or voltage, depending on the setting for each channel.
You may use the analog output to drive chart recorders, or they can provide a feedback signal for proportional temperature control systems. They may also be used as general purpose analog control signals, since each level can be set via the computer interfaces to a fixed value.

Alarms
Each channel can be programmed individually with an upper and lower temperature limit. An audio alarm and a relay closure indicate when any channel exceeds its preset temperature or voltage limits. The front-panel LED display will indicate which channel has exceeded its limit.

Data Logging Capability
An internal, battery backed-up clock/calendar is used to time-stamped temperature readings. The SR630 can be set to scan, time-stamp, and record up to 16 channels at intervals from 10 to 9999 seconds. Data is either sent immediately to the printer, or stored in the internal 2,000 point buffer for output at a later time (via GPIB or RS-232).

Built-In Printer Interface
A standard Centronics printer interface makes it simple to get hardcopy output of temperature or voltage scans. Two hardcopy formats are provided. The SR630 can print a continuous stripchart showing up to 16 different temperatures (see the example below). In addition, data can be printed in a tabular format which logs the time, date, and temperature or voltage for each channel.

Analog Multiplexer
The SR630 can also function as a 1:15 analog multiplexer. Any of the first 15 input channels can be switched out to channel 16 and passed on to other instruments. This feature is useful in ATE systems and many other monitoring applications.

Available Thermocouples
Although the SR630 will read types B, E, J, K, R, S, and T type thermocouples, for many applications type K, or Chromel/Alumel, will serve well. K type thermocouples offer a wide temperature range (-200°C to +1250°C), a low standard error, and good corrosion resistance. SRS can supply welded K-type thermocouples with either Teflon or high-temperature glass insulators.