SRS SIM984 Isolation Amplifier
- Isolation voltage up to ±1000 V
- 1 MHz bandwidth
- 15 nV/√Hz input noise
- 1 MΩ input impedance
- Gain of x1, x10 or x100
Lambda Exclusive Promotion:
Additional 12 months warranty for free (2 years total) via our UK Service Centre.
The SRS SIM984 is a wide bandwidth, low noise isolation amplifier. It has a gain of up to x100 and a bandwidth up to 1 MHz. The input stage is floating and is optically coupled to the output stage which is chassis grounded. The input signal can float up to 1000 V above or below ground. DC output offset can be adjusted from the front panel with a small screwdriver. In addition to measuring isolated signals, the SIM984 can also be used to break ground loops and reduce common-mode interference.
The SIM984 is a wide bandwidth, low noise isolation amplifier. It has a gain of up to x100 and a bandwidth up to 1 MHz. The input stage is floating and is optically coupled to the output stage which is chassis grounded. The input signal can float up to 1000 V above or below ground. DC output offset can be adjusted from the front panel with a small screwdriver. In addition to measuring isolated signals, the SIM984 can also be used to break ground loops and reduce common-mode interference.
|
SIM984 Specifications |
|
|
Isolation voltage |
±1000 V (max) |
|
Leakage current |
<2 µA at 1000 VDC |
|
Isolation capacitance |
1000 pF |
|
IMRR |
150 dB (DC) |
|
Max. input |
±10 V |
|
Input Impedance |
1 MΩ |
|
Input noise (typ.) |
15 nV/√Hz @ 1 kHz |
|
Input offset drift |
3 µV/°C (typ) |
|
Output voltage range |
±10 V |
|
Output current |
±20 mA (max) |
|
Output resistance |
50 Ω |
|
Output offset |
±0.1 V, adjustable |
|
Output offset drift |
1 mV/°C (typ.) |
|
Output noise |
80 µVrms (100 Hz bandwidth) |
|
Gain |
x1, x10, x100 |
|
Gain error |
±0.5 % |
|
THD |
0.005 % (at 1 kHz, 600 Ω load) |
|
Frequency range |
DC to 100 Hz (Low BW) |
|
Rise time |
300 ns (Vout = 4 V) |
|
Slew rate |
25 V/µs (Vout = 20 Vpp) |
|
Interface |
Serial via SIM interface |
|
Connectors |
Banana jacks (2 front-panel), BNC (1 front-panel), BNC (1 rear-panel) |
|
Power |
Power supplied by the SIM900 Mainframe, or optionally by a user-supplied DC power supply (±15 V, +5 V, and +24V) |
|
Dimensions |
1.5" × 3.6" × 7.0" (WHL) |
|
Weight |
1.5 lbs. |
|
Warranty |
One year parts and labor on defects in materials and workmanship |
Stanford Research Systems SIM984A datasheet
Stanford Research Systems SIM984A user manual
Why buying from Lambda makes sense
| Photo | Product | SKU | |
|---|---|---|---|
 | SRS SIM900 Mainframe | - | > |
 | SRS SIM910 JFET Preamplifier | - | > |
 | SRS SIM914 350 MHz Preamplifier | - | > |
 | SRS SIM918 Precision Current Preamplifier | - | > |
 | SRS SIM921 AC Resistance Bridge | - | > |
 | SRS SIM922 Diode Temperature Monitors | - | > |
 | SRS SIM922A Diode Monitor | - | > |
 | SRS SIM923 Platinum RTD Temperature Monitors | - | > |
 | SRS SIM923A Platinum RTD Temperature Monitors | - | > |
 | SRS SIM925 Four-Wire Multiplexer | - | > |
 | SRS SIM928 Isolated Voltage Source | - | > |
 | SRS SIM940 Rubidium Frequency Standard | - | > |
 | SRS SIM954 Dual-Channel Inverting Amplifier | - | > |
 | SRS SIM960 Analog PID Controller (Analogue) | - | > |
 | SRS SIM964 Analog Limiter | - | > |
 | SRS SIM965 Bessel and Butterworth Filter | - | > |
 | SRS SIM970 Multi Channel Digital Voltmeter | - | > |
 | SRS SIM980 Summing Amplifier | - | > |
 | SRS SIM983 1 MHz Scaling Amplifier | - | > |
 | SRS SIM9B1 Blank Single-Width SIM Module Prototype Kit | - | > |
 | SRS SIM9B2 Blank Double-Width SIM Module Prototype Kit | - | > |