SRS O740ANT2 Outdoor GPS/GNSS Antenna Kit for FS740 FS752

The O740ANT2 antenna solution consists of components for the construction of a robust GPS/GLONASS antenna system. The kit includes a Trimble Bullet III GNSS omnidirectional antenna with LNA, a mounting kit (for wall, pole, shelf, cabinet or magnetic mounting), a lightning surge arrestor, 100’ of 10 AWG copper wire for lightning grounding, 25’ and 50’ of low loss, 0.195” diameter, 50 Ω TNC extension cables (male-female, not RP), and a TNC to BNC adapter to connect to the SRS GNSS receiver and an assortment of hardware to assist with installation.

Antenna

• Assembled antenna mast with magnetic base
• TNC (M) to BNC (M) adapter to connect to FS740
• 3/16" Allan key to remove magnetic mount
• Alternate mounting arm
• Die cast aluminium mounting bracket
• SS Wood screws (#10 x 1.5”) for mounting bracket
• #10 Flat washer for mounting bracket

Cables

• LMR400, TNC (M-F), 25’ (1.4 dB loss)
• LMR400, TNC (M-F), 50’ (4.2 dB loss)
• 100’, #10 AWG, solid, green insulation
• Silicone tape wrap for water proofing
• Black cable ties, UV protected, 7.5”, 50 lb.

Lightening arrestor

• 10 kA lightning surge suppressor, TNC (M-F) with copper ground lug
• Self-tapping #8x1/2” SS metal screws to mount arrestor
• Original lug and screw for lightning arrestor ground