Sensepeek 6012 PCBite Kit with 2x SQ10 Probes for DMM
A complete PCBite kit with two complete handsfree SQ10 probes with one red and one black probe (positive and negative) packed together with a set of red/black banana cables intended for connection directly to a multimeter or power supply.
The kit includes the following parts.
- 2x SQ10 probes and pin tipped test needles (red/black) 6011
- 1x Large Base plate (A4) with insulated cover
- 4× PCBite PCB holders
- 2x Banana to dupont test wires (red/black)
The new SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included colour-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete.
All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with the included PCB holders and base plate which is a must for handsfree function.
The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. One side of the included baseplate is matte and the other is mirror polished. The mirror polished surface makes it easy to see components on the circuit board underside. For added protection during measurement the included insulation cover can be mounted on one of the surfaces. See user guide for specifications.
Includes:
- 4× PCBite PCB holders
- 1x Set of yellow insulation washers for the PCB holders
- 1x Large Base plate (A4)
- 1x Insulation cover for the base plate (A4)
- 1x Micro fibre cloth
- 2x SQ10 probes and pin tipped test needles (red/black)
- 2x Banana to dupont test wires (red/black)
- 1x Set of cable holders (red/black)
- 2x Extra test needles
PCBite Probe Product Brochure | Photo | Product | SKU | |
|---|---|---|---|
 | Rigol ADP0150BNC 50 Ohm Impedance Adapter | - | > |
 | Sensepeek 4002 PCBite Kit, 4 PCB Holders & Polished A5 Base Plate | - | > |
 | Sensepeek 4003 PCBite Kit with 4x Probes & Test Wire | - | > |
 | Sensepeek 4004 PCBite Wear & Tear Kit | - | > |
 | Sensepeek 4005 Sensepeek PCBite 4x SP10 Probes with Test Wires | - | > |
 | Sensepeek 4007 PCBite Kit, 4 PCB Holders & Polished A4 Base Plate | - | > |
 | Sensepeek 4008 2x4 Wire Harness | - | > |
 | Sensepeek 4009 PCBite Wear & Tear Kit - PCBite Probe | - | > |
 | Sensepeek 4010 PCBite Probe Cable Accessories | - | > |
 | Sensepeek 4011 PCBite 2x SP10 Probes for DMM (red/black) | - | > |
 | Sensepeek 4012 PCBite Kit with 2x SP10 probes for DMM | - | > |
 | Sensepeek 4013 PCBite 100 MHz Handsfree Oscilloscope Probe | - | > |
 | Sensepeek 6014 – SQ200 - 200 MHz Handsfree Oscilloscope Probe | - | > |
 | Sensepeek 6023 - SQ350 - 350 MHz Handsfree Oscilloscope Probe | - | > |
 | Sensepeek 6024 - SQ500 - 500 MHz Handsfree Oscilloscope Probe | - | > |
 | Sensepeek 6027 PCBite Kit with 2x SQ350 350 MHz & 4x SQ10 Handsfree Probes | - | > |
 | Sensepeek 4022 PCBite PCB Holders (Pack of 2) | - | > |
 | Sensepeek 6016 PCBite Kit with 2x SQ200 200 MHz Handsfree Oscilloscope Probes | - | > |
 | Sensepeek 6019 PCBite Kit with 2x SQ200 200 MHz & 4x SQ10 Handsfree Probes | - | > |
 | Sensepeek PCBite 6025 with 2x SQ350 350 MHz handsfree oscilloscope probes | - | > |
 | Sensepeek 6029 PCBite Kit with 2x SQ500 500 MHz & 4x SQ10 Handsfree Probes | - | > |
 | Sensepeek 6026 PCBite kit with 2x SQ500 500 MHz Handsfree Oscilloscope Probes | - | > |
 | Sensepeek 6028 Set of 5x Ground Spring Needle 3.5mm | - | > |
 | Sensepeek 4015 PCBite Kit with 2x SP100, 100MHz Handsfree Oscilloscope Probes | - | > |
 | Sensepeek 4016 PCBite Kit with 2x SP200 200 Mhz Handsfree Oscilloscope Probes | - | > |
 | Sensepeek 4017 Insulation Cover | - | > |
 | Sensepeek 4018 PCBite Kit with 2x 100MHz & 4x SP10 Handsfree Probes | - | > |
 | Sensepeek 4019 PCBite Kit with 2x 200MHz & 4x SP10 Handsfree Probes | - | > |
 | Sensepeek 4020 PCBite 3x Magnifier – PCB Inspection | - | > |
 | Sensepeek 4021 Insulated XL A3 Base Plate | - | > |
 | Sensepeek 6005 PCBite 4x SQ10 Probes with Test Wires | - | > |
 | Sensepeek 6011 PCBite SQ10 Probes for DMM (red/black) | - | > |
 | Sensepeek PCBite Test Probe & Lead Promotion | - | > |
 | Pico Technology TA375 100MHz Passive Oscilloscope Probe, 1:1/10:1 Switchable | - | > |
 | Pico Technology TA386 200MHz Passive Oscilloscope Probe, 1:1/10:1 Switchable | - | > |
 | Pico Technology TA375 100MHz Passive Oscilloscope Probe, 1:1/10:1 Switchable | - | > |
 | Pico Technology MI031 BNC Plug to Crocodile Clips Cable, 2m | - | > |
 | Pico Technology MI007 60 MHz High-Impedance Passive Probe 1:1/10:1, pack of 2 | - | > |
 | Rigol FC1868 LA Module Data Ribbon Cable | - | > |
