Rigol MSO8204A, 2.0GHz Oscilloscope (3GHz Single Channel), 10 GSa/s, 500 Mpts, 4 Analogue Channel, 16 Digital Logic Channel

The MSO8000A series digital oscilloscope provides you with the highest 3GHz analog bandwidth and 10GSa/s sampling rate. The low bandwidth model can be upgraded to 3GHz (single channel mode) through software at any time, ensuring you have higher signal fidelity and a resolution as low as 100ps (up to 2ps at a minimum time base) to view small waveform details.

Economical and practical eye chart pre testing
Using an oscilloscope for eye pattern measurement can help users visually display the transmission quality of digital signals, thereby understanding the strength of inter code interference in the system and making improvements in system design. For situations that often require quality verification of digital signals, the MSO8000A digital oscilloscope with eye graph function is undoubtedly your wise choice.

Capture rate up to 600kwfms/s
The waveform capture rate of up to 600000 wfms/s can reduce the Dead time and make it easier to find burrs and other accidental events in the signal, thus greatly improving the debugging efficiency of engineers.

Full memory hardware measurement
No longer limited to the waveform effect visible on the screen, accurate results can still be obtained for multi cycle high-frequency signal testing.

500Mpts deep storage, up to 450000 frames of hardware waveform recording
The MSO8000A series comes standard with a storage depth of 500Mpts, and the hardware waveform recording function adopts segmented storage technology. It can selectively capture and store signals of user concern by setting triggering conditions, and mark the time on the signals. This not only ensures the efficiency of capture, but also further expands the total time for waveform observation.

Order Information Order No.

The MSO8000-BND function and application bundle option includes the following:-

Serial Protocol Analysis Option

• PC Serial Bus Trigger and Analysis (RS232/UART) MSO8000-COMP
• Embedded Serial Bus Trigger and Analysis (I2C, SPI) MSO8000-EMBD
• Auto serial bus trigger and analysis (CAN, CAN-FD, LIN) MSO8000-AUTO
• FlexRay serial bus trigger and analysis (FlexRay) MSO8000-FLEX
• Audio Serial Bus Trigger and Analysis (I2S) MSO8000-AUDIO
• MIL-STD-1553 Bus Trigger and Analysis (MIL-STD-1553) MSO8000-AERO

Measurement Application Option

• Dual-channel 25 MHz Arbitrary Waveform Generator MSO8000-AWG
• Built-in Power Analysis (Required to Purchase the RPA246 Phase Deviation Correction Jig) MSO8000-PWR
• Real-time Eye Diagram and Jitter Analysis (Option) MSO8000-JITTER