Rigol MSO5000-BND Application Bundle for Rigol MSO5000 Series Oscilloscopes

Buy all MSO5000 signal decoder options for a bundle price!

This option contains:

• Rigol MSO5000-COMP
  • Decode the RS232/UART (up to 20 Mb/s) bus's TX/RX data (5-9 bits), parity (Odd, Even, or None), and stop bits (1-2 bits)
• Rigol MSO5000-EMBD
  • Decode the address (with or without the R/W bit) of the I2C bus, data, and ACK.
  • Decode the MISO/MOSI data (4-32 bits) of the SPI bus. The available mode includes "Timeout" and "CS".
• Rigol MSO5000-AUTO
  • Decode the protocol version (1.X or 2.X) of the LIN bus (up to 20 Mb/s). The decoding displays sync, ID, data, and check sum.
  • Decode the remote frame (ID, byte number, CRC), overload frame, and data frame (standard/extended ID, control domain, data domain, CRC, and ACK) of the CAN bus (up to 5 Mb/s). The supported CAN bus signal types include CAN_H, CAN_L, TX/RX, and DIFF.
• Rigol MSO5000-FLEX
  • Decode the frame ID, PL (payload), Header CRC, Cycle Count, Data, Tail CRC, and DTS of the FlexRay bus (up to 10 Mb/s). The supported signal types include BP, BM, and RX/TX.
• Rigol MSO5000-AUDIO
  • Decode I2S audio bus left channel data and right channel data, supporting 4-32 bits. The alignment modes include I2S, LJ, and RJ. Source channel: CH1~CH4, D0~D15 (only available for the MSO5XX4 model or the model installed with the MSO5000-4CH option)
• Rigol MSO5000-AERO
  • Decode the MIL-STD-1553 bus signal's data word, command word, and status word (address+last 11 bits). Source channel: CH1~CH4
• Rigol MSO5000-PWR
  • MSO5000 Series Built-in power analysis Ripple and Power Quality measurements
• Rigol MSO5000-AWG
  • Dual-channel 25 MHz Arbitrary Waveform Generator