Jeremy Gilbert

Electronic products can emit unwanted electromagnetic radiation, or electromagnetic interference (EMI). Regulatory agencies create standards that define the allowable limits of EMI over specific frequency ranges. Testing designs and products for compliance to these standards can be difficult and expensive, but there are tools and techniques that can help to minimise the cost of testing and help to enable designs...

Lambda can accept the following payment methods for website orders: Credit card, handled by Sagepay or PayPal PayPal, either Express Checkout or Standard Checkout Purchase Order number, from customers with an existing account with us If none of the above are appropriate for you, please call us on +44 (0) 1582 764334 or email [email protected]

The revolutionary architecture of the PicoScope 5000 Series oscilloscopes allows them to operate at a range of resolutions from 8 bits, like most standard digital oscilloscopes, all the way up to a very high-resolution 16 bit mode. Unlike software-enhanced resolution modes, these are true hardware resolutions achieved by combining multiple high-resolution ADCs to create minimal distortion and noise while maximizing bandwidth. The...

Most users who venture into the world of high-speed cameras have already tried capturing video with a home camcorder and observed that they cannot see the necessary details of the event under study because of motion blur or because the event was missed entirely. In many cases, the shutter speed and frame-rate can be determined fairly quickly by trial and...

Each sensor has different timing. The real timing depends on: Exposure Time (ET). This time is defined by xiAPI by (XI_PRM_EXPOSURE) Data Readout Time (trd) Transfer speed (MB/s) - depends on used interface Amount of data transferred (MB) - depends on image resolution and number of bits transferred per pixel (BPP) Free-Run mode (no trigger) Each image exposition is started automatically when...

Global Shutter Mode Basic spec Global reset of all photo diodes Integration simultaneously in all photo diodes Global transfer of all photo diode signals in sensing nodes Readout line by line Artifacts caused by subject movement Exposure time is too long (during exposure the subject displacement cause blurring of captured image) Left: Original without movement Right: Image blurred due to...

Transfer mode MU9 cameras are connected to PC with USB 2.0. BULK data transfer is used. It guaranties data delivery, but it doesn't guarantee constant bandwidth. Packet Size Setting The MU9 cameras have two transfer packet sizes: Compatible-Size - where packets with 512 bytes are used (default) Enhanced-Size - where packets with 1024 bytes are used With Compatible-Size the camera...

We are delighted to introduce to the AV6471 Fusion Splicer from Lab41/Absys. A cost-effective and reliable workhorse fibre fusion splicer designed for easy operation and providing repeatable, high quality low-loss splices. It’s a simple case of doing a specific job extremely well for a sensible cost. Only £2,852 with battery (excl VAT) Ideal for: Trunk line installation FTTx Production General...

Pico Technology are celebrating being named as winners of a Queen’s Award for Enterprise, the UK’s highest accolade for business success. The award, given for our achievements in International Trade, recognises our long history of designing PC Oscilloscopes, PC Data Loggers and Automotive Diagnostics tools and exporting them around the world. “This is the most exciting event for Pico Technology since our foundation in...