Anne Fallon

  1. AirMicro for iPhone & iPad

    AirMicro is the first wireless digital microscope made for the iPad, iPhone or iPod touch.

    AirMicro is a portable microscope that wirelessly pairs with an Apple iOS device to view live images, freeze and capture images to the Photo album of the device.

    Wi-Fi connectivity to any iOS device
    Up to 400x magnification
    Fast & easy to use
    For use in the lab, office, clinic or home
    View & store live images

    {tab=Features}

    AirMicro is a fast, easy to use digital microscope that connects via Wi-Fi to an Apple iPhone, iPad or iPod touch. It can provide up to 400x magnification and allows the user to view live images, freeze them and capture them to the Photo album of the device.


    AirMicro is widely used in science education, law enforcement, and manufacturing quality control worldwide.

    AirMicro can also be used in conjuction with programs like Skype™ or iChat™ to show colleagues what your AirMicro is seeing in real time over the internet.

    The package also includes software for Windows and Mac which will capture stills, video and time lapse.

    iPhone, iPad, iPod touch and iOS are trademarks of Apple Inc.

    {tab=Specifications}

    Specifications
    Image sensor 1/4 Inch 5Mp Pixel Color CMOS
    Resolution 320x240(QVGA) / 640x480(VGA)
    Capture Still image capture by Application
    White Balance MWB
    Gain AGC
    Frame Rate QVGA about15fps (It changes with radio wave environment and the use device.)
    Camera button Functions a) Freeze/Release, b) Still image capture, c) Push W/B, d) QVGA/VGA exchange. After power supply OFF W/B and Resolution are maintained.
    Indicator LED ON: The image is being transmitted OFF: Power off or Battery is low Flash 0.5sec: The WB is being changed Flash 1sec: The resolution is being changed After turning switch on: 1 Flash QVGA, 2Flash VGA
    Light switch A-OFF-B (Depends on the attached lens) A: OFF, or reflective LEDs OFF: OFF B: Reflection, or Non Reflective LEDs
    Power switch ON / OFF Slide switch
    Magnification x50 (When standard lens is used) Approximate magnification when displayed on 14-inch
    Support Protocol IEEE802.11b
    Camera Operational Range about 10m
    Access Format ad hoc mode
    Antenna Internal Chip Multilayer antenna
    Frequency 2.4GHz band width
    SSID AirMicroNNN
    IP Address 192.168.NNN.1
    Camera Screw 1/4-20 UNC
    Battery AA (Alkaline, Ni-MH)x3
    Power Consumption about 2.5W (With standard lens)
    Continuous Operation time Alkaline: about 2 hours (With standard lens) Ni-MH: about 3 hours (With standard lens) *Depends on environment
    Lens Mount SCALAR DG MOUNT Supply Current: A and B about 5V 120mA
    Operation Temp 0—40°C
    Save Temp -10—60°C
    Outside Dimension 153(H)x46(W)x43(D) *without Lens
    Weight 130g(without battery, with Lens)
    *Specifications subject to change without notice. Patent is registered in Japan, US, Germany, France, UK, China, Taiwan, Korea, etc,.

    {tab=Videos}

    For more AirMicro video demos, please see our AirMicro Playlist on YouTube.

    {tab=Applications}

    Industry
    Workers can inspect for leaks, cracks and corrosion of manufacturing products.

    Education
    In a classroom , each student would simultaneously see what the teacher is showing with the AirMicro. When the teacher presses the capture button on the AirMicro, that image is captured in the photo album of each students iPad at the same time.

    Forensics
    Investigators can snap images on an iPhone and email them to a colleague at the lab or to a collaborative agency.

    Beauty
    Evaluation of skin surface conditions and can check what kind of treatment is suitable for various skin types.

    Telemedicne
    Doctors can show patients live images and add these images into practice management apps and software.

    Field Science
    Field scientist can use an Apple mobile device with the AirMicro to examine specimens on site without destroying a sample to transport to a lab.

    {/tabs}

  2. NEW board from Foresight Imaging provides high quality, real-time H.264 compression at up to 1080p 60Hz

     

    20 Jul 2012

    Announcing the release of IDEA v3.4 software & support for the new AccuStream Express HD+C real-time H.264 compression boards!

    We are pleased to announce the release of the IDEA v3.4 software and support for the new AccuStream Express HD+C frame grabber and video streamer, from Foresight Imaging, providing high quality, real-time H.264 compression at up to 1080p 60Hz.

     

     

     

     

    With IDEA v3.4, improvements include the following:

    • AccuStream Express HD+C, HD 75+C, and SD 50+C support for real-time, hardware H.264 compression & video streaming
    • WDM enhancements New, multi-board (up to 4) example program for steaming to memory and disk with display with up to4 boards simultaneously
    • Direct 2D support for real-time display in addition to DirectDraw and GDI methods
    • Updated StreamCap example application for WDM and VFW drivers
    • Support in all example programs for AVI2 file formats for file sizes of greater than 4GB
    • Updated example programs for ActiveX, C libraries, WDM, and VFW drivers
    • Addition of dynamic buffering for video streaming operations DVI contrast/brightness support with HD+ and HD+C series of board

     

    To view the ReadMe file and to download the software upgrade, please click here.

    For further information and quotation request, please contact Clive Phillips or Mark Bambrick on 01582 764 334 or click here to email

    Lambda Photometrics Ltd is a leading UK Distributor for Laser and Light based products in areas including Optics, Electro-optic Testing, Spectroscopy, Machine Vision, Optical Metrology, Instrumentation, Microscopy and Pulsed Xenon Light Systems.

  3. Terms & Conditions of Sale

    We make all offers and accept all orders only upon and subject to the following terms and conditions which shall form part of any Contract concluded between us to the exclusion of any other terms and conditions except as specified on the face of our quotation or as otherwise agreed in writing by our authorised signatory.


    1. GENERAL
    1.1 All offers remain open for acceptance within 30 days after the date of our quotation and subject to availability of the goods at the date of issue of our acceptance of order or confirmation of Contract.

    1.2 Acceptance must be by way of unqualified acceptance of our written quotation and its contents and these terms and conditions. Descriptions, specifications, drawings and particulars of weights and dimensions contained in our catalogues, advertisements and other literature are approximate only and form no part of the contract.

    1.3 All extras and accessories ordered but not specified in our quotation will be charged separately as will costs of all test adjustments, alterations, additions and other work undertaken at the Buyer’s request.

    1.4 Unless expressly accepted by our authorised signatory in writing any qualification or amendment of these conditions (whether in the Buyer’s order or acceptance of our offer or otherwise) shall be invalid.

    1.5 No binding contract will be created by the Buyer’s acceptance of our offer until our written confirmation of the Contract/Order has been dispatched to the Buyer which confirmation will include these terms and conditions of sale.

    1.6 Acceptance of delivery of the goods shall be deemed conclusive evidence of the Buyer’s acceptance of these conditions.


    2. CONSEQUENTIAL LOSS OR DAMAGE
    2.1 Save as expressly provided in these conditions we shall be under no liability whatsoever in respect of any loss, damage, injury or expense whatsoever arising from any defect in the goods and in particular (but without prejudice to the generality of the foregoing) we shall not be liable for any consequential damage or expense or any loss of profit or any liability to third parties incurred by the Buyer in consequence of such defects. Nothing in these conditions shall apply to exclude or restrict any liability which cannot be excluded or restricted by virtue of the Unfair Contract Terms Act.

    2.2 The Buyer will indemnify us in respect of any liability, loss, claim or proceeding whatsoever arising whether under Statute or at Common Law in respect of any damage to property or the death of or injury to any person caused by or by the use of any goods sold by us to the Buyer unless, in the case of death or personal injury only, such death or injury shall be proved to have been caused by our negligence or that of our employees.


    3. WARRANTIES
    All implied warranties are hereby excluded to the fullest extent permitted by law and only such warranties as are expressly given by us shall apply to this contract.


    4. PRICES
    4.1 All prices are in £ sterling unless otherwise stated.

    4.2 All prices are subject to variation at the time of invoicing due to changes in the exchange rate. Should the exchange rate have varied beyond the quoted window between the time of quotation and the time of invoicing then the seller reserves the right to modify the price accordingly.

    4.3 Import duty where applicable is included in the prices. The actual level of import duty applied may vary from time to time.

    4.4 Unless otherwise stated all prices quoted are for goods ex. our works. Packing and carriage costs will be charged extra for the Buyer’s account.


    5. PAYMENT AND TITLE TO GOODS
    5.1 It is a condition of this contract that payment is made on one of the following bases -

    5.1.1 In certain cases, in full within 30 days of invoice date. Such accounts will only be opened after credit investigations at our sole discretion have been satisfactorily completed.

    5.1.2 As set out in our quotation.

    5.2 Until full payment has been received by us, as specified in our quotation, Lambda shall retain the ownership of the goods and the Buyer shall

    5.2.1 Hold them as bailee only and shall not sell, part with or modify them in any way nor incorporate them into any other machine or device in such a way as to destroy or obscure their identity, and

    5.2.2 Insure them for their full contract value against “All Risks” with an underwriter or insurance company approved by us, our interest to be noted on the Policy and a Certificate to this effect is to be produced to us on request.

    5.2.3 Store them separately from all other goods and in such a way and place that they may at all times be clearly identified as our property.

    5.2.4 Until such time as the property in the goods passes to the buyer, the buyer shall hold the goods as the seller’s fiduciary agent and bailee. The buyer shall account to the seller for the proceeds of sale or otherwise of the goods, including insurance proceeds, and shall keep all such proceeds separate from any monies or property of the buyer and third parties.

    5.3.1 In the event of a failure by the Buyer to pay for the goods and/or the commission of an act of bankruptcy and/or the commencement of any proceedings to wind-up the Buyer where the Buyer is a Limited Company, then we reserve the right to enter the Buyer’s premises or any other place where the goods might be, without notice, in order to re-possess the goods.

    5.3.2 Any such goods or part of goods so re-possessed may be re-sold without notice to the Buyer and without prejudice to our right to claim damages against the Buyer.

    5.4 We reserve the right at any time to charge interest on late payments with effect from the due date and on a day to day basis at a compound annual rate of 4% above bank base lending rate determined by Royal Bank of Scotland plc and in force from time to time.

    5.5 In the event that the buyer fails to make payment for the goods or fails to take delivery of any goods supplied by us, then all sums outstanding in respect of any goods supplied by us shall become due and payable immediately and we may in our absolute discretion and without prejudice to any other rights we may have –

    5.5.1 Suspend all future deliveries of the goods to the Buyer under the contract in question or under any other contract and/or terminate any such contract(s)without liability upon our part and/or –

    5.5.2 Require payment of interest on all amounts due at a compound annual rate of 4% above Bank base lending rate for the time being prevailing from the date when payment for the goods in question became due to the actual payment.


    6. DELIVERY AND RISKS IN THE GOODS
    6.1 We will use our best endeavours to comply with our quoted delivery dates but we will not be liable for any loss, damage, injury or expense, either direct or indirect and including but not limited to loss of profit or liability to third parties, which maybe suffered by the Buyer by reason of late delivery of the goods from whatsoever cause such late delivery may arise.

    6.2 Although given in good faith, the time for delivery mentioned in our quotation is intended as an estimate only and is not to be treated as of the essence of the contract.

    6.3 The Buyer shall have no right to reject goods by reason of their being delivered other than at the quoted time.

    6.4 Delivery shall be as follows –

    6.4.1 Good sold “Delivered” will be dispatched by whatever means of transport we choose unless a specified method of transport has previously been agreed in writing. The risk in the goods will pass to the Buyer when they reach the destination named by the Buyer and before unloading.

    6.5 We shall not be liable for failure to deliver goods or to complete work or for failure to do so promptly if such failure arises due to force majeure or by reason of any delays occasioned by strikes, riots, lock-outs or other labour trouble, war, fire accident, mechanical failure, non-availability to us of supplies of stock parts, or materials, delay in delivery to us of the goods or materials therefore by suppliers or other persons, Government action, legislation or regulation of any kind, Act of God, or any circumstance whatsoever outside our reasonable control and such delay or failure to deliver or to complete work on goods shall not affect the Buyer’s obligation to pay for the goods already delivered and work already completed.


    7. CANCELLATION
    The Buyer shall not be entitled to cancel the contract or any part thereof nor to require delay in performance without our written consent which will only be given on terms which will indemnify us against all loss.


    8. PACKING
    When goods are sold packed the extent of packing and/or protection necessary will be at our discretion. Any special packing stipulated by the Buyer will be charged to the Buyer’s account. Any goods sent unpacked at the Buyer’s request will be at the risk of the Buyer. All packing materials are non-returnable.


    9. LOSS OR DAMAGE IN TRANSIT
    9.1 We accept no liability for loss or damage in transit except in the case of goods sold “DELIVERED” and in such case our responsibility will be limited to replacing or repairing the missing or damaged goods or at our option, refunding the purchase price. In the event no claim will be considered unless both the carriers and ourselves are notified in writing.

    9.2 In the case of damaged goods notification must be received in writing within three days of receipt other than on any proof delivery note, and in the case of non-delivery within 14 days after the date of dispatch as notified by us.


    10. INSOLVENCY OF BUYER
    10.1 This clause applies if:

    10.1.1 The Buyer makes any voluntary arrangement with its creditors or becomes subject to an administration order or (being an individual or firm) becomes bankrupt or (being a company) goes into liquidation (otherwise than for the purposes of amalgamation or reconstruction); or

    10.1.2 an encumbrancer takes possession, or a receiver is appointed, of any of the property or assets of the Buyer, or

    10.1.3 the Buyer ceases, or threatens to cease, to carry on business; or

    10.1.4 the Seller reasonably apprehends that any of the events mentioned above is about to occur in relation to the Buyer and notifies the Buyer accordingly.

    10.2 If this clause applies then without prejudice to any other right or remedy available to the Seller, the Seller shall be entitled to cancel the Contract or suspend any further deliveries under the Contract without any liability to the Buyer, and if the Goods have been delivered but not paid for the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.


    11. HEALTH AND SAFETY
    The Buyer shall be responsible for ensuring that all Statutory, Government or Local Authority regulations are complied with in relation to the operation of any goods purchased from us. Should any local regulations require amendments to the specification included in the supply contract, then the cost of any such amendments shall be charged to the account of the Buyer in addition to the original contract price. The Buyer shall ensure that all instructions, Handbooks, Notices and Warnings issued by us are properly understood and complied with at all times by all persons using the goods or working within close proximity to them, the Buyer being responsible for the translation of the English narrative supplied by us.


    12. GOVERNING LAW
    These conditions and any Contracts between us and the Buyer shall be governed in all respects by the laws of England except that the Uniform Law on the International Sale of Goods should not apply either in whole or in part. The Buyer shall submit to the jurisdiction of the English Courts.


    13. NOTICES
    Where a notice is required to be served on us by the Buyer or on the Buyer by us such notice must be served in writing. Any notice to us shall be sent to us at our offices at Lambda House, Batford Mill, Harpenden, Herts, and any such notice to the Buyer shall be sent to the Buyer at the address given by the Buyer in his order or acceptance of our offer. Where in these conditions a period is specified within which notice is to be given such notice must reach the party to which it is addressed within that period.


    14. SET-OFF AND COUNTER CLAIM
    The Buyer shall not be entitled to withhold payment of any sums after they become due by reason of any right of set-off or Counter-claim which the Buyer may have or allege to have or for any other reason whatsoever.


    15. APPLICABILITY OF THESE CONDITIONS
    These conditions shall also apply to any future oral or written contract for the supply of goods and/or services by us to the Buyer save to the extent that such conditions are in any future contracts specifically varied or excluded or are inconsistent with what is expressly agreed in any such future contract.


    16. EXPORT LICENCES
    If equipment is to be exported, particularly to Eastern Block countries, an Export Licence may be required. It is the responsibility of the exporting agent to obtain the necessary clearance for exporting the equipment.


    17. DISTANCE SELLING REGULATIONS
    Under The Consumer Protection (Distance Selling) Regulations 2000, you have the right to cancel a contract within seven days – starting from the day you take delivery of the goods (a “cooling of” period).

    If you wish to cancel, you must notify us in writing, by fax or e-mail clearly stating your full details, invoice number and cancellation instructions. We will acknowledge receipt of cancellation by issuing you with an RMA number within 2 working days, goods must not be returned to us without our RMA authorisation number, and subsequently will not be accepted.

    Once you have cancelled the contract:-

    • The goods must be returned to us complete (undamaged) and in their original packaging, as ordered and delivered. You are responsible for the cost of returning the goods to us.
    • You are under a duty to take reasonable care of the goods (including re-usable packaging, manuals etc) until they are returned to us.
    • You are under a duty to take reasonable care to see that they are received by us and not damaged in transit.
    • If it is more convenient, we can arrange collection by our couriers, any costs incurred will be deducted from your final refund.
    • We will refund you the full amount paid for the goods, less any costs incurred sending or collecting the goods within 30 days of receipt of the notice of cancellation.

     

    Lambda Photometrics Limited Registered No 1332370

     

  4. Directions

    Our address details are:

    Lambda Photometrics Ltd
    Lambda House 
    Batford Mill 
    Harpenden 
    Hertfordshire 
    AL5 5BZ 
    T: +44 (0)1582 764334 
    F: +44 (0)1582 712084 
    E: [email protected]

     


    View Larger Map

     

    BY ROAD


    From Heathrow Terminals 1,2 and 3

    Leave the airport via the M4 (west – away from Central London) to the first junction signposted to the M25. Take the M25 in the direction of Watford/Oxford. Stay on the M25 to junction 21 – M1 northbound (signposted to Luton & Birmingham).

    Leave the M1 at junction 10 (signposted to Luton & Luton Airport). Follow Luton Airport direction on Luton by-pass and leave at the first junction (sign posted B653 Wheathampstead).

    Follow B653 towards Wheathampstead for approximately 4.5 miles.


    From Heathrow Terminal 4
    Follow the signs for the M25 then as above.

    From Central London
    Take the A41 and follow the signs to the M1. The M1 starts at the junction of the A5 and the A405 close to Brent Cross Shopping Centre and is well sign posted. Once on the M1 follow the directions as above.

    From A1 north or southbound
    Leave the A1 at the junction north of the Hatfield tunnel (signposted to Welwyn Garden City, Hatfield and A414 Hertford). Follow the signs to Welwyn Garden City and at the first junction go back under the A1 signposted to Wheathampstead B653 and Luton. Stay on the B653 for 6.2 miles to Lambda.

     

    BY RAIL


    There is a direct train service from Gatwick to Harpenden, the Gatwick railway station is part of the airport complex. There are frequent services from St. Pancras International Station and the journey time is 25 – 35 minutes depending on the stops made. There are 6 per hour at busy periods and 4 trains per hour for most of the day. Kings Cross St. Pancras is on the Northern, Victoria, Piccadilly, Circle and Metropolitan lines of the London Underground.

    Call Lambda before you leave or from Harpenden station and we will collect you

  5. Company History

    2013                 Lambda release their new web-site making it easy for customers to find what they are looking for and to purchase over the web.

     

                            With increased demand for electrical and electronic measurements in materials science and industry, Lambda broadens its portfolio to supply a range of test equipment from DC sourcing to complex signal analysis. Advanced “Vision” applications require greater frame rates and increased resolution.  Lambda introduces a range of camera’s to meet the most demanding of applications with the latest connectivity and software available.

     

    2012                 Lambda emphasise skills in the following applications areas:

    Metrology

    Microscopy

    Spectroscopy

    Machine Vision

    Test and Measurement

    Lasers and Fibre Optics

    recognising that customers have interests in at least one of the above applications and understanding how each of these capabilities complement one another.

     

    2011                 Adding Raman measurement systems to our Spectroscopy range shows Lambda’s commitment to the process, pharmaceutical, biomedical, chemical, LED lighting and research communities.

    Lambda strengthens its electro-optical capability by offering test systems for FLIR, SWIR and visible cameras, laser systems, electronics, and motion control.

     

    2010                 Understanding that many customer applications require a detailed understanding of the surface of materials and devices, Lambda introduces the most advanced Desktop Scanning Electron Microscope, SEM, to the UK and Ireland markets.

     

    2009                 To increase the Identification and Image processing product range, Lambda offer a comprehensive range of Industrial camera’s and vision sensors.

     

    2008                 Physik Instrumente (PI) UK spun out of Lambda as a separate company, to further develop their nano-positioning and piezo stage business.

     

    2007                 Increased success in the Automotive and Aerospace markets, leads Lambda to begin sales of remote sensing systems.  Using fibre-optic technology, allows customers to replace highly complex and lengthy set-ups, using traditional strain gauges, with a single fibre and test instrument.

     

    2003                 Growth at process industry customers, coupled with the need to measure ingredient and compound quality, leads Lambda to release in line spectroscopy products.

     

    2000                 Lambda enjoys rapid growth, with the rise of the communications customers technology changes and infrastructure investments.

     

    1998                 Success with industrial vision and illumination projects within UK process industry guides Lambda to set up a separate Machine Vision group, focusing on supplying leading vision and illumination solutions for a wide variety of industries.

     

    1993                 Polytec-PI GmbH acquire Lambda Photometrics, recognising the companies contribution to group sales, Lambda’s experienced group of scientists and engineers and their importance for future growth in the UK and Irish markets.

     

    1981                 Lambda extend their “light” capabilities, by entering the market for the testing of Fibre Optic communication systems, driven by the need for increased bandwidth.

     

    1977                 Lambda Photometrics Ltd founded by Bob Carless as one of the first UK & Ireland distributors of lasers, optics and related technologies. Distribution agreements signed with Zygo, Quantel & Stanford Research Systems, all of whom remain with Lambda today.  This shows the commitment Lambda has to these organisations applications and products, and the value these companies place in Lambda as an extension to their sales and applications engineering workforce.

  6. MPA100 OptiMelt Melting Point Apparatus

    The MPA100 OptiMelt provides a fast and accurate means of automatically determining the melting points and melting ranges of chemical substances. With microprocessor-controlled temerature ramping, a built-in digital camera, and a selling price that is half that of competing models, OptiMelt offers the best value of any commercially available melting point apparatus.

  7. Print Copper on Polymers and Paper with the Sinteron 2010

     

    07 Mar 2012


    Precision pulse energy and time duration control makes Printed Electronics metal ink sintering processes easier to develop.
     
    The release of the new Sinteron 2010 from Xenon Corporation provides even greater flexibility for sintering conductive Cu and Ag metallic inks, curing thin-film substrates and for solar and surface modifications using pulsed flashlamp technology. Whereas the previous Sinteron 2000 system featured four preset values for the pulse widths, the Sinteron 2010 allows for digitally programmable pulse widths. The ability to dial up just about any desired width within a range makes the Sinteron 2010 extremely flexible and valuable to process development.

     


    A number of attractive features are designed into this 19 inch rack-based stand-alone system. The pulse amplitude can be continuously adjusted like the Sinteron 2000. The pulse width for the Sinteron 2010 is adjustable in increments of 5µs in the range of 100µs to 2,000µs. By having total control of the pulse amplitude and pulse width, the optical energy delivered by the system can be precisely controlled. As the pulse profile is very linear at maximum amplitude a relationship of 1000J/ms can be assumed facilitating precise pulse energy delivery. The Sinteron 2010 allows for connection of either Spiral or Linear Lamp housings. These can provide optical footprints of 19mm x 305mm (0.75 inches x 12 inches) or 127mm (5 inches) diameter areas. As Xenon Corporation manufactures Lamps and Lamp Housings, other optical profiles are readily available.

    The introduction of Sinteron 2010 is welcome news for those involved in photonic sintering of conductive inks for printed electronics in areas such as displays, smart cards, RFID, low cost medical sensors, novelty greeting cards and solar applications. The non-contact and low thermal characteristic of the photonic curing process lends itself to web-based printing techniques such as inkjet, flexography, gravure, and screen-print.

    For more information, please see the Sinteron Systems product page, click here to email or contact Ken Middleton or Dave Chambers on 01582 764334.
     
    Lambda Photometrics Ltd is a leading UK Distributor for Laser and Light based products in areas including Optics, Electro-optic Testing, Spectroscopy, Machine Vision, Optical Metrology, Instrumentation, Microscopy and Pulsed Xenon Light Systems.

     

  8. Real-time, H.264 HD Video Acquisition & Streaming - 1080p, 1080i, 720p & more!

     

    25 Jun 2012

    Real-time, H.264 HD Video Acquisition & Streaming - 1080p, 1080i, 720p & more!

     

     

    Foresight Imaging, the leader in high performance imaging for medical, defense, & multimedia applications, introduces the AccuStream Express HD+C family of PCIe x4 imaging boards. AccuStream Express HD+C acquires any HD, DVI, HDMI, RGBHV, S-Video, composite, monochrome, standard, or non-standard video signal and provides real-time H.264 compression and streaming.

     

     

    With the PCIe x4 design, transfers are at 750 MB/second, easily allowing real-time streaming to disk of 1080p and real-time display:

    •     Capture ANY video signal
    •     Includes 1080p & 1920 x 1200 x 60Hz
    •     Real-time, hardware H.264 compression: from 2-30 Mbps
    •     Superior image quality
    •     Real-time video scaling
    •     Windows & Linux support
    •     Software tools: C++ libraries, ActiveX, WDM driver, VFW driver, example programs with source code

     

     AccuStream Express HD+ is ideal for high performance imaging applications including:

    •     Surgical recording
    •     Medical imaging
    •     Flight simulation
    •     Monitoring Security
    •     Multimedia
    •     Any application requiring long format video acquisition

     

    Also available are the AccuStream Express HD 75+C (up to 1080i & 720p) and the AccuStream Express SD 50+C (up to 480p & 576p).

    For more information, please click here to email or contact Clive Phillips or Mark Bambrick on 01582 764334.

    Lambda Photometrics Ltd is a leading UK Distributor for Laser and Light based products in areas including Optics, Electro-optic Testing, Spectroscopy, Machine Vision, Optical Metrology, Instrumentation, Microscopy and Pulsed Xenon Light Systems.

     

  9. ExpressCard/34 HD-SDI Laptop Grabber - NOW HAS AUDIO!

     

    15 Jun 2012

    As the developer of the world’s FIRST frame grabbers for laptops, IMPERX has released another reliable, easy to utilize, feature rich frame grabber.

     

     

     

    The VCE-HDEX01 supports SD and HD real-time acquisition with real time RGB gain/offset, LUTs, Gamma Corrections and auto-white balance. Includes full SDK and software. Perfect for Broadcast, Surveillance, Microscopy, Medical imaging and much more.

    For more information, please click here to email or contact Clive Phillips or Mark Bambrick on 01582 764334.  

    Lambda Photometrics Ltd is a leading UK Distributor for Laser and Light based products in areas including Optics, Electro-optic Testing, Spectroscopy, Machine Vision, Optical Metrology, Instrumentation, Microscopy and Pulsed Xenon Light Systems.

     

  10. Striking a new path with cost-effective vision solutions using PoE

     

    15 Jun 2012

    The Baumer GigE Power Switch Plus is now available.  

    The new Power Switches simplify the integration of GigE and PoE cameras onto industrial networks. The device is an unmanaged Gigabit Ethernet switch with 8 x 10/100/1000Base-T ports and PoE support. It features a wide input voltage range of 12...36 VDC and can be DIN-Rail and wall mounted.

    • Single-cable solution for GigE
    • Reduce installation and maintenance costs
    • Simplify your set-up 
    • Easy integration using Baumer network components
    • Versatility of camera models available

     

    For more information, please click here to email or contact Clive Phillips or Mark Bambrick on 01582 764334.

     

     

     Lambda Photometrics Ltd is a leading UK Distributor for Laser and Light based products in areas including Optics, Electro-optic Testing, Spectroscopy, Machine Vision, Optical Metrology, Instrumentation, Microscopy and Pulsed Xenon Light Systems.

Items 371 to 380 of 477 total

Page