This 500ml bottle contains enough polymer to clean approximately 2,500in² (16,000cm², 17ft²) of surface area.
These bulk bottles do NOT come with any sprayers, applicator brushes, pipettes, or peel tabs/floss/mesh for removal from the surface. Please consider adding a sprayer, brushes, pipettes, Chemically Inert Mesh (FCNet) or First Contact Peel Tabs (FCPT) to your cart.
Note 1: Sprayable First Contact is less viscous and thinner in order to be sprayable and has less polymer per volume. It is therefore a little less costly for the same volume of liquid, when compared to Regular First Contact, and requires more applications for the same thickness film.
Note 2: We spent weeks and weeks trying dozens of different spray heads and searching for some that would be stable in the First Contact Solvent system. We found three-one in each size. You can get extras under accessories in our store. Other spray heads, such as those from a hardware store or supply house, even "chemically resistant" ones, failed after a couple hours of use. Spray systems other than those provided by us should be considered disposable, single use items.
Note 3: For your convenience, we strongly suggest you order an extra spray head or two if you don't plan on using the entire kit all at once - or, be sure to follow instructions and flush the spray head with the included First Contact Thinner/Solvent.
General non-spray polymer application process:
Do you suspect water spots on your optics? Use this spray polymer in conjunction with water spot pretreatment to remove water spots: